Halo X LED UFO High Bay Lights – A Practical Guide for Warehouses, Gyms, and Industrial Floors
Kevin HernandezHalo X LED UFO High Bay Lights are made for big, tall spaces where visibility and reliability matter. If you run a warehouse, production floor, gym, or big-box retail, you need bright, even light without glare—and fixtures that don’t chew through energy or maintenance budgets. That’s exactly what Halo X delivers: high-output LEDs, smart wattage choices, and optics that put light where you need it.
In this guide, we’ll cover why contractors choose Halo X, how to size wattage by mounting height, and simple install tips that save time on site. You’ll also find a quick sizing example you can copy for your next project.
Why choose Halo X?
- High-output performance: lumen packages that reach typical 30,000+ levels while staying efficient.
- Selectable wattage / CCT: dial output and color on site—no fixture swap if needs change.
- Low-glare, wide coverage: engineered optics for bright, even light at common high-bay heights.
- Dimming & controls ready: 0–10V dimming plays nicely with sensors and schedules.
- Long life, fewer lifts: 50,000+ hours helps cut service calls and downtime.
- Durable construction: rugged housing with reliable thermal management; wet/damp models available.
Problems Halo X solves
Dark aisles and hot spots
Legacy HID/fluorescent often leaves shadows where you need clarity most. Halo X optics spread light evenly across aisles, racks, and courts to reduce misses and eye strain.
High energy and maintenance costs
Running metal halide lamps adds up fast—energy use, re-lamping, and lift rentals. Halo X’s efficient LEDs and long life shift that spend back into your operation.
Glare and poor visibility
Uniform, low-glare illumination makes it easier to read labels, see edges, and keep athletes safe. That’s where Halo X earns its keep.
Where Halo X shines
- Warehouses & distribution: clear aisles and accurate picking at height.
- Sports & gymnasiums: bright, consistent coverage for courts and training areas.
- Manufacturing floors: higher visibility for QC and safety.
- Retail/big-box: product pop without harsh glare.
- Hangars & large venues: scalable output for very tall mounting heights.
How to size Halo X (fast)
Start with mounting height and target foot-candles, then fine-tune on site using selectable wattage and 0–10V dimming. The guide below fits most high-bay scenarios.
| Mounting Height | Recommended Wattage | Approx. Lumens | Best Applications |
|---|---|---|---|
| 15–20 ft | 100–150W | 14,000–18,000 | Small warehouses, courts |
| 20–30 ft | 150–200W | 22,000–30,000 | Large warehouses, production |
| 30–40 ft | 200–240W | 30,000–36,000+ | Hangars, large venues |
Quick sizing example
You’re lighting a 28 ft warehouse with a 25–30 fc target. Start at 150–200W, set CCT to 5000K for contrast, and space fixtures at ~1.0–1.2× mounting height. Fine-tune with selectable wattage and a 0–10V control to balance light levels and kWh.
Installation tips
- Mounting: hook/chain or yoke; confirm hardware load ratings and anchor points.
- Beam control: choose optics (e.g., 90°/120°) or diffusers to manage glare over courts and aisles.
- Controls: pair with occupancy/daylight sensors; use 0–10V dimming for off-peak savings.
- Power quality: consider surge protection in facilities with large motors or frequent switching.
- Thermals: keep heat sinks clear; verify max ambient temp for your model.
Pro tip: If you see glare on shiny floors or courts, add a diffuser lens or step CCT to 4000K in problem areas—small tweaks, big comfort gains.
Frequently asked questions
What height is best for Halo X?
Most projects fall between 15–40 ft. Use the chart above to pick a starting wattage, then fine-tune on site with dimming/selectable output.
Is Halo X good for sports lighting?
Yes—uniform coverage and low glare make it a strong fit for multi-use courts and school gyms.
Can I use sensors?
Absolutely. Halo X supports 0–10V dimming and works with occupancy/daylight controls to cut off-peak kWh.
What color temperature should I choose?
5000K is common for warehouses and retail. 4000K can reduce perceived glare on glossy surfaces or courts.
Do I need special wiring?
Standard 120–277V is typical. Always follow local code and manufacturer instructions.
